Description
| SETTINGS | UNIT | UNIT |
|---|---|---|
| Round cutting capacity | mm | 230 |
| Flat cutting capacity | mm | 240 x 230 |
| Square cutting capacity | mm | 230 |
| Main drive motor | kW | 1,0 – 1,3 |
| Hydraulic motor | kW | 0,37 |
| Power motor | kW | 0,25 |
| Coolant pump | kW | 0,12 |
| Cutting speeds | m/min. | 35 – 70 |
| Bracelet dimensions | mm | 2730x27x0.9 |
| Working height | mm | 590 |
| Weight | kg | 530 |
| Length | mm | 1700 |
| Width | mm | 800 |
| Height | mm | 1160 |
Only 90 degrees. Made entirely of steel. Free-rolling rollers.
A limit switch mounted on the vise stops the machine when the block is exhausted.
Once the part is clamped between the rollers, no further tightening is necessary.
The workpiece is conveyed through the vise to the bar stop which contains a micro-switch controlling the bar feed motor.
A parts counter controls the number of cuts.
The machines stop automatically when the blade breaks.
The machines are equipped with a removable coolant reservoir incorporating an electric submerged coolant pump that supplies coolant to both guide assemblies.
The bi-metal saw blade and 1.2 meter feed roller table are supplied as standard.
- 3Mt Material Roller Table
- Inverter
- ILC microspray device
- Coolant pump
- Material length stop
- Safety switch
- Mechanical upper clamping
- Control Panel
- Height adjustment switch
- Hydromechanical blade tension
- Saw blade 27
- 1.2 Mt roller table
- Saw blade brash
