Description
| SETTINGS | UNIT | UNIT |
|---|---|---|
| Round cutting capacity | mm | 320 |
| Flat cutting capacity | mm | 350 x 320 |
| Square cutting capacity | mm | 320 |
| Main drive motor | kW | 2,2 |
| Hydraulic motor | kW | 1,1 |
| Coolant pump | kW | 0,12 |
| Cutting speeds | m/min. | 20 – 100 |
| Bracelet dimensions | mm | 3660x27x0.9 |
| Working height | mm | 640 |
| Weight | kg | 1340 |
| Length | mm | 1850 |
| Width | mm | 1850 |
| Height | mm | 1250 |
Only 90 degrees. Made entirely of steel. Free-rolling rollers.
A limit switch mounted on the vise stops the machine when the block is exhausted.
Once the part is clamped between the rollers, no further tightening is necessary.
The workpiece is conveyed by the vise to the bar stop which contains a micro-switch controlling the bar feed motor.
A parts counter controls the number of cuts.
The machines stop automatically when the blade breaks.
The machines are equipped with a removable coolant reservoir incorporating an electric submerged coolant pump that supplies coolant to both guide assemblies.
Bi-metal saw blades are supplied as standard.
- Hydraulic blade tension
- Chip conveyor
- 3Mt Material Roller Table
- Hydraulic upper clamping
- Several segments
- Saw blade 27
- PLC control panel
- Inverter
- Robust gearbox
- Coolant pump
- Hydromechanical blade tension
- Height adjustment switch
- Saw blade brash
- Cover switch
- Hydraulic vice
