Description
| SETTINGS | UNIT | UNIT |
|---|---|---|
| Round cutting capacity | mm | 330 |
| Flat cutting capacity | mm | 500 x 320 |
| Square cutting capacity | mm | 320 |
| Main drive motor | kW | 2,2 |
| Hydraulic motor | kW | 0,37 |
| Power motor | kW | 0,25 |
| Coolant pump | kW | 0,12 |
| Cutting speeds | m/min. | 20 – 100 |
| Bracelet dimensions | mm | 4160x34x1.1 |
| Working height | mm | 640 |
| Weight | kg | 770 |
| Length | mm | 2100 |
| Width | mm | 850 |
| Height | mm | 1300 |
Only 90 degrees. Made entirely of steel.
Oil bath reduction gear and carbide pads and rollers in the blade guides.
The front jaw contains a number of hardened rollers driven by an electric worm gear motor.
The rear vise consists of free rollers.
A limit switch mounted on the vise stops the machine when the block is exhausted.
Once the part is clamped between the rollers, no further tightening is necessary.
The workpiece is conveyed through the vise to the bar stop which contains a micro-switch controlling the bar feed motor.
A parts counter controls the number of cuts.
The machines stop automatically when the blade breaks.
The machines are equipped with a removable coolant reservoir incorporating an electric submerged coolant pump that supplies coolant to both guide assemblies.
The bi-metal saw blade and 1.2 meter feed roller table are supplied as standard.
- ILC microspray device
- Hydraulic blade tension
- Chip conveyor
- 3Mt Material Roller Table
- Hydraulic vise
- Sawdust brush
- Safety switch
- Mechanical upper clamping
- Robust gearbox
- Control Panel
- Hydraulic vice
- Inverter
- Metarian boundary tree
- Saw blade 34
- Height adjustment switch
- Hydromechanical blade tension
- Coolant pump
- 1.2 Mt roller table
