Description
| SETTINGS | UNIT | UNIT |
|---|---|---|
| Round cutting capacity | mm | 320 |
| Flat cutting capacity | mm | 610 x 310 |
| Square cutting capacity | mm | 320 |
| Main drive motor | kW | 2,2 |
| Hydraulic motor | kW | 1,1 |
| Coolant pump | kW | 0,12 |
| Cutting speeds | m/min. | 20 – 100 |
| Bracelet dimensions | mm | 4160x34x1.1 |
| Working height | mm | 640 |
| Weight | kg | 1585 |
| Length | mm | 2100 |
| Width | mm | 1850 |
| Height | mm | 1250 |
Only 90 degrees. Made entirely of steel. Oil bath reduction gear and carbide pads and rollers in the blade guides.
The front jaw contains a number of hardened rollers driven by an electric worm gear motor.
The rear vise consists of free-rolling rollers. A limit switch mounted on the vise stops the machine when the block is exhausted.
Once the part is clamped between the rollers, no further tightening is necessary.
The workpiece is fed through the vise to the bar stop, which contains a microswitch controlling the bar feed motor. A parts counter tracks the number of cuts.
The machines stop automatically when the blade breaks.
The machines are equipped with a removable coolant reservoir incorporating an electric submerged coolant pump that supplies coolant to both guide assemblies.
The bi-metal saw blade and 1.2 meter feed roller table are supplied as standard.
- ILC microspray device
- Hydraulic blade tension
- Chip conveyor
- 3m roller table
- Hydraulic upper clamping
- Several segments
- Saw blade 34
- PLC control panel
- Coolant pump
- Inverter
- Robust gearbox
- Hydromechanical blade tension
- Height adjustment switch
- Saw blade brash
- Safety switch
- Hydraulic vise
