Description
| SETTINGS | UNIT | UNIT |
|---|---|---|
| Round cutting capacity | mm | 560 |
| Flat cutting capacity | mm | 570 x 560 |
| Square cutting capacity | mm | 560 |
| Main drive motor | kW | 4 |
| Hydraulic motor | kW | 1,1 |
| Drive motor | kW | 0,55 |
| Coolant pump | kW | 0,12 |
| Chip conveyor motor | kW | 0,25 |
| Cutting speeds | m/min. | 20 -100 |
| Band dimensions | mm | 6000x41x1.3 |
| Working height | mm | 590 |
| Weight | kg | 2242 |
| Length | mm | 3500 |
| Width | mm | 1050 |
| Height | mm | 2050 |
- Laser line pointer
- Hydraulic blade tension
- Chip conveyor
- 3Mt Material Roller Table
- ILC microspray device
- line path
- Mechanical upper clamping
- Inverter
- Saw blade 41
- Material boundary tree
- Hydraulic vice
- Safety switch
- Pressure adjustment
- Hydromechanical blade tension
- Coolant pump
- Robust gearbox
- Control Panel
- Synchronization arm/moving vise
- Metarial 1.2 Mt Roller Table
- Optical height adjustment
- Saw blade brash
Made entirely of steel.
The rear jaw contains a number of hardened rollers driven by a worm gear and a wheel by an electric motor.
The front vise consists of a number of free rollers.
A limit switch mounted on the vise stops the machine when the block is exhausted.
Once the workpiece is clamped between the rollers, no further tightening is necessary.
The workpiece is conveyed through the vise to the bar stop which contains a micro-switch controlling the bar feed motor.
A parts counter controls the number of cuts.
The machines stop automatically when the blade breaks.
The machines are equipped with a removable coolant reservoir incorporating an electric submerged coolant pump that supplies coolant to both guide assemblies.
The bi-metal saw blade and 1.2 meter feed roller table are supplied as standard.
