BMSO-560CH NC

 

Fully automatic linear path for cutting solid stocks, tubes and profiles in steel, light cast iron and non-ferrous for a cut at only 90°.

Made entirely of steel. The rear jaw contains a number of hardened rollers driven by a worm gear and a wheel by an electric motor.

The front vise consists of a number of free rollers.

A limit switch mounted on the vise stops the machine when the block is exhausted.

Once the workpiece is clamped between the rollers, no further tightening is necessary.

The workpiece is conveyed through the vise to the bar stop which contains a micro-switch controlling the bar feed motor.

A parts counter controls the number of cuts.

The machines stop automatically when the blade breaks.

The machines are equipped with a removable coolant reservoir incorporating an electric submerged coolant pump that supplies coolant to both guide assemblies.

 

 

 

 

Contact us
Categories: , , ,

Request a quote

  • Hidden
  • Hidden
  • Hidden

Description

SETTINGS UNIT UNIT
Round cutting capacity mm 560
Flat cutting capacity mm 600 x 560
Square cutting capacity mm 560
Main drive motor kW 5,5
Hydraulic motor kW 2,2
Coolant pump kW 0,12
Chip conveyor motor kW 0,25
Cutting speeds m/min 20 – 100
Band dimensions mm 6000x41x1.3
Working height mm 810
Weight kg 4000
Length mm 3250
Width mm 2200
Height mm 2350
  • Blade inclined at 2°
  • 3Mt Material Roller Table
  • Several segments
  • Hydraulic upper clamping
  • Hydraulic blade tension
  • ILC microspray device
  • Movable arm adjustment screw
  • Hydromechanical blade tension
  • Inverter
  • Mobile arm/vise
  • line path
  • Hydraulic vice
  • PLC control panel
  • Hydraulic power supply vice
  • Hydraulic rear vise included
  • Robust gearbox
  • Safety switch
  • Pressure adjustment
  • Boron oil sawdust
  • Saw blade brash
  • Optical height adjustment
  • Saw blade 41
  • Proximity switch to detect blade slippage
  • Hydraulic split vise

• Fully automatic NC bandsaw for sawing thick-walled profiles and solid materials
• Robust one-piece saw frame with hydraulic vertical movement and linear guide
• 500 mm feed length
• Input of cutting length and average number via “SIEMENS” NC (programmable logic controller) for
10 different programs
• Continuously adjustable band speed 20–100 m/min
• Hydraulic-mechanical belt tensioning
• Automatic machine stop in case of band breakage
• Precise measurement of slide position on magnetic scale
• Sensitive cutting pressure regulation function for material properties
• Rapid advance of the saw frame with automatic saw feed during transitions (light sensor)
• Automatic adjustment of the guide arm, synchronous with the hydraulic clamping of the horizontal vise
• Band guide with hard metal buffer sheets and rollers
• Automatic belt break protection
• Wheel-driven chip brush

Similar products