Description
| SETTINGS | UNIT | UNIT |
|---|---|---|
| Round cutting capacity | mm | 800 |
| Flat cutting capacity | mm | 820 x 800 |
| Square cutting capacity | mm | 800 |
| Main drive motor | kW | 7,5 |
| Hydraulic motor | kW | 1,5 |
| Power motor | kW | 0,55 |
| Coolant pump | kW | 0,12 |
| Chip conveyor motor | kW | 0,25 |
| Cutting speeds | m/min. | 20-100 |
| Band dimensions | mm | 8200x54x1.6 |
| Working height | mm | 585 |
| Weight | kg | 3250 |
| Length | mm | 3900 |
| Width | mm | 1200 |
| Height | mm | 2350 |
- Chip conveyor
- ILC microspray device
- 3Mt Material Roller Table
- Laser line pointer
- Hydraulic blade tension
- Inverter
- Hydraulic vice
- Pressure adjustment
- Metarial 1.2 Mt Roller Table
- Paving track
- Saw blade 54
- Optical height adjustment
- Saw blade brash
- Synchronization arm/moving vise
- Metarian boundary tree
- Control Panel
- Coolant pump
- Robust gearbox
- Safety switch
Made entirely of steel.
The rear jaw contains a number of hardened rollers driven by a worm gear and a wheel by an electric motor.
The front vise consists of a number of free rollers.
A limit switch mounted on the vise stops the machine when the block is exhausted.
Once the workpiece is clamped between the rollers, no further tightening is necessary.
The workpiece is conveyed through the vise to the bar stop which contains a micro-switch controlling the bar feed motor.
A parts counter controls the number of cuts.
The machines stop automatically when the blade breaks.
The machines are equipped with a removable coolant reservoir incorporating an electric submerged coolant pump that supplies coolant to both guide assemblies.
The bi-metal saw blade and 1.2 meter feed roller table are supplied as standard.
