Description
| SETTINGS | UNIT | UNIT |
|---|---|---|
| Round cutting capacity | mm | 325 |
| Flat cutting capacity | mm | 400 x 320 |
| Square cutting capacity | mm | 320 |
| +30° Round cutting capacity | mm | 325 |
| +30° Flat cutting capacity | mm | 360 x 320 |
| +30° Square cutting capacity | mm | 320 |
| +45° Round cutting capacity | mm | 305 |
| +45° Flat cutting capacity | mm | 270 x 320 |
| +45° Square cutting capacity | mm | 270 |
| +60° Round cutting capacity | mm | 190 |
| +60° Flat cutting capacity | mm | 180 x 240 |
| +60° Square cutting capacity | mm | 180 |
| Main drive motor | kW | 2,2 |
| Hydraulic motor | kW | 0,55 |
| Coolant pump | kW | 0,12 |
| Cutting speeds | m/min. | 20 – 100 |
| Bracelet dimensions | mm | 4380x34x1.1 |
| Working height | mm | 640 |
| Weight | kg | 1185 |
| Length | mm | 2100 |
| Width | mm | 800 |
| Height | mm | 1600 |
With the movement of the arc, it is possible to cut between 90° and +30°.
The 90° cutting capacity is 320 mm x 450 mm for the flat type and 325 mm for round-shaped materials.
With automatic height adjustment sensors, the arc approaches the material at a rapid speed and a hydraulic cutting control allows the arc to move back up onto the material after cutting.
This entire process is controlled by a digital counter on the control panel and the total duration of a power outage decreases.
The arc's fixing at any angle is controlled by a hydraulic braking system and you can control it by another digital counter located on the main body of the machine.
- ILC microspray device
- Hydraulic upper clamping
- Hydraulic blade tension
- Chip conveyor
- Laser line pointer
- 3m roller table
- 3m motorized roller table
- line path
- Sensitive pressure
- Saw blade 34
- Coolant pump
- Safety switch
- Hydromechanical blade tension
- Saw blade brush
- Hydraulic vice
- Optical height adjustment
- Cutting width adjustment lever
- Robust gearbox
- 2 angled blades
- Inverter
- To adjust the degree panel
- Hydraulic fastening
- Control Panel
