Description
| SET UP | UNIT | UNIT |
|---|---|---|
| Round Cutting Capacity | mm | 330 |
| Flat Cutting Capacity | mm | 360 x 330 |
| Square Cutting Capacity | mm | 330 |
| Main Drive Motor | kW | 3 |
| Hydraulic Pump | kW | 0,55 |
| Feed Motor | kW | 0,25 |
| Coolant Pump | kW | 0,12 |
| Cutting Speeds | m/min. | 20 – 100 |
| Band Dimensions | mm | 5000x34x1.1 |
| Working Height | mm | 635 |
| Weight | kg | 1030 |
| Length | mm | 2830 |
| Width | mm | 920 |
| Height | mm | 1630 |
Completely steel fabricated.
The rear jaw contains a number of hardened rollers driven through a worm and wheel by an electric motor.
The front vice consists of a number of free running rollers.
A limit switch assembled on top the vice stops the machine when the block is exhausted.
Once the work piece is clamped between the rollers no further clamping needed.
The work is fed through the vice to the bar stop which contains a micro-switch controlling the bar feed motor.
A piece counter controls the number of the cuts.
The machines stop automatically at the blade breaking.
The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies.
Bi-Metal sawblade and 1.2 meters infeed roller table are supplied as standard.
- 2° Inclined Blade
- Saw Blade 34
- Moveable Arm/Vice
- Inverter
- Security Switch
- Saw Blade Brash
- Hydromechanical Blade Tension
- Liner Way
- Metarial Limit Shaft
- Hydrolik Mengene
- Control Panel
- Mechanic Top Clamping
- Optical Height Adjustment
- Heavy Duty Gearbox
- Pressure Adjustment
- Coolant Pump
- 1.2 m Roller Table
- Chip Conveyor
- 3 Mt Material Roller Table
- Hydraulic Blade Tension
- Microspray Device
