Description
| SETTINGS | UNIT | UNIT |
|---|---|---|
| Round cutting capacity | mm | 330 |
| Flat cutting capacity | mm | 360 x 330 |
| Square cutting capacity | mm | 330 |
| Main drive motor | kW | 3 |
| Hydraulic pump | kW | 0,55 |
| Power motor | kW | 0,25 |
| Coolant pump | kW | 0,12 |
| Cutting speeds | m/min. | 20 – 100 |
| Band dimensions | mm | 5000x34x1.1 |
| Working height | mm | 635 |
| Weight | kg | 1030 |
| Length | mm | 2830 |
| Width | mm | 920 |
| Height | mm | 1630 |
Made entirely of steel. The rear jaw contains a number of hardened rollers driven by a worm gear and a wheel by an electric motor.
The front vise consists of a number of free rollers.
A limit switch mounted on the vise stops the machine when the block is exhausted.
Once the workpiece is clamped between the rollers, no further tightening is necessary.
The workpiece is conveyed through the vise to the bar stop which contains a micro-switch controlling the bar feed motor.
A parts counter controls the number of cuts.
The machines stop automatically when the blade breaks.
The machines are equipped with a removable coolant reservoir incorporating an electric submerged coolant pump that supplies coolant to both guide assemblies.
The bi-metal saw blade and 1.2 meter feed roller table are supplied as standard.
- Chip conveyor
- 3Mt Material Roller Table
- Hydraulic blade tension
- Microspray device
- Blade inclined at 2°
- Saw blade 34
- Mobile arm/vise
- Inverter
- Safety switch
- Saw blade brash
- Hydromechanical blade tension
- line path
- Metarian boundary tree
- Hydrolik Mengene
- Control Panel
- Mechanical upper clamping
- Optical height adjustment
- Robust gearbox
- Pressure adjustment
- Coolant pump
- 1.2 m roller table
