Description
| SETTINGS | UNIT | UNIT |
|---|---|---|
| Round cutting capacity | mm | 450 |
| Flat cutting capacity | mm | 695 x 425 |
| Square cutting capacity | mm | 425 |
| +30° Round cutting capacity | mm | 450 |
| +30° Flat cutting capacity | mm | 560 x 425 |
| +30° Square cutting capacity | mm | 425 |
| +45° Round cutting capacity | mm | 430 |
| +45° Flat cutting capacity | mm | 430x 425 |
| +45° Square cutting capacity | mm | 425 |
| +60° Round cutting capacity | mm | 320 |
| +60° Flat cutting capacity | mm | 260 x 425 |
| +60° Square cutting capacity | mm | 290 |
| Main drive motor | kW | 4 |
| Hydraulic motor | kW | 0,55 |
| Coolant pump | kW | 0,12 |
| Chip conveyor | kW | 0.25 |
| Cutting speeds | m/min. | 20 – 100 |
| Bracelet dimensions | mm | 5400x41x1.3 |
| Working height | mm | 690 |
| Weight | kg | 1630 |
| Length | mm | 2850 |
| Width | mm | 1300 |
| Height | mm | 1800 |
With the movement of the arc, it is possible to cut between 90° and +30°.
The 90° cutting capacity is 440 mm x 700 mm for the flat type and 440 mm for round-shaped materials.
With automatic height adjustment sensors, the arc approaches the material at a rapid speed and a hydraulic cutting control allows the arc to move back up onto the material after cutting.
This entire process is controlled by a digital counter on the control panel and the total duration of a power outage decreases.
The arc's fixing at any angle is controlled by a hydraulic braking system and you can control it by another digital counter located on the main body of the machine.
- ILC microspray device
- Hydraulic blade tension
- Laser line pointer
- 3m motorized roller table
- 3Mt Material Roller Table
- Chip conveyor
- Hydraulic upper clamping
- line path
- Hydromechanical blade tension
- Blade Brash
- To adjust the degree panel
- Inverter
- Control Panel
- Sensitive pressure
- To adjust the degree panel
- Saw blade 41
- Coolant pump
- Safety switch
- Robust gearbox
- Optical height adjustment
- 3 angled blades
- Hydraulic vice
