Description
| MODEL | ESG-3A1224 | |
| Table size | 300x600mm(11 13/16×23 5/8″) | |
| Maximum grinding length | Longitudinal | 600mm (23 5/8″) |
| Maximum grinding width | Transversal | 300mm (11 13/16″) |
| Maximum distance from the table surface to the spindle axis | 585mm (23″) | |
| Standard magnetic chuck size | 300x600m(11 13/16×23 5/8″) | |
| Longitudinal movement of the table | Maximum displacement, hydraulic | 650mm (25 9/16″) |
| Maximum displacement, manual | 730mm (28 3/4″) | |
| Maximum displacement, infinitely variable | 60Hz, 5-25m/min, 50Hz, 5-20m/min | |
| Cross-country running | Automatic transverse increment | 1-19mm (0.04″-0.75″) |
| Maximum automatic lateral movement | 310mm (12 3/16″) | |
| Maximum manual transverse travel | 340mm (13 3/8″) | |
| Turn-by-turn steering wheel | 5mm (0.2″) | |
| Graduated steering wheel | 0.02mm (0.001″) | |
| vertical feed tubehead | Automatic feeding | 0.001-0.04mm(0.00005-0.002″) |
| Proceed step by step | 0.001mm (0.00005″) | |
| Fast travel (approximately) | 150mm/min | |
| Slow movement (approximately) | 6mm/min | |
| Steering wheel revolution | 1mm (0.05″) | |
| Steering wheel graduation | 0.005mm (0.0005″) | |
| Grinding spindle drive | Speed | 60HZ,1750RPM; / 50HZ,1450RPM |
| Rated power | 5.0HP | |
| Standard grinding wheel | Diameter | 304MM(12″) |
| Width | 31.75m (1 1/4″) | |
| Tree diameter | 76.2mm (3″) | |
| Hydraulic motor | Rated power | 2.0HPx6P |
| Crossfeed motor | Rated power | 80Wx6P |
| Lift motor | Rated power | 80Wx6P |
| floor space | Total space required | 2700x1600x1850mm(106 1/2x63x73″) |
| Weight | Net weight (approx.) | 1990KGS (4378LBS) |
| Gross weight (approximately) | 2290KGS (5038LBS) | |
| Rated power (approximately) | 7.5HP | |
| Packaging dimensions | L x W x H | 2480x2140x2100mm (98x84x83″) |
GENERAL CHARACTERISTICS:
1. Column: Enlarged column with honeycomb ribs particularly suitable for intensive grinding.
2. Construction: The table, saddle and base are cast from high-quality, heavily ribbed iron.
3. Spindle: The enlarged spindle set is supported by four preloaded precision angular contact ball bearings for heavy-duty use.
4. Slides: The vertical, crossed (double bladder) and longitudinal (one V and one flat) slides are coated with Turcite-B, offering stable movement and lasting precision.
5. Automatic continuous lubrication system: All slides and screws are fully lubricated by an automatic continuous lubrication system to eliminate wear on the slides and screws.
6. Cross feed: Ball screw for transverse stroke, powered by an AC motor.
7. Hydraulic table: The table speed varies from 5 to 25 m/min. With rack and pinion table drive for manual operation.
8. Proximity switch: Provides a built-in (concealed) proximity switch, offering safe and easy operation. Speed control
9. Table: The pre-adjustable hydraulic table speed control allows the operator to preset the speed rate, enabling the same speed rate to be achieved when engaging the hydraulic table every time.
10. Handwheels: Zeroing slip ring with vernier on the vertical handwheel and vernier on the cross-feed handwheel.
