Description
| SETTINGS | UNIT | UNIT |
| Operating time | Seconds | 58 (approx.) |
| Pipe thickness | mm | 1.5 and 2 |
| Entry lock | mm | Adjustable from 18 to 37 |
| Distance between axes | mm | 85 |
| Engine power | kW / HP | 0,75 / 1 |
| 3-phase voltage | 230/400 V | |
| Weight | kg | 200 |
Features :
- Normally, an operator takes an average of 30 to 45 minutes to create a recess with the holes for the handle and lock cylinder in any square or rectangular tube. With the Nargesa PI85, this time is reduced to less than a minute. It is therefore a high-production machine.
- The finish is perfect, with the ideal amount of play to allow the lock to be fitted without any need for adjustment. Consequently, assembly time is minimal.
- Most companies that have acquired the PI85 press not only use it for themselves, but also sell the perforated tubes to other companies.
- The tubes that can be used with the machine are 35×35, 40×40, 40×50, 40×60, 40×70, 40×80, 50×50, 50×60, 50×70 and 50×80.
- The thickness can be 1.5 mm and 2 mm. The material is irrelevant; the machine can perforate normal iron as well as galvanized or stainless steel.
- Very important: always indent on side 35, 40 or 50.
- The perforation of the lock and the handle is combinable, that is to say that one can perforate a tube either with the handle and the lock at the ends, or with only the lock at one end and the handle at the other.
- The depth of the recess is adjustable and so is the lock opening, from 18 mm to 37 mm.
- Hydraulic punching system.
- Safety pedal.
- Type of lock with cylinder.
- Material type: Iron, stainless steel, galvanized steel.
- Adjustable interlocking length.
