Description
| PARAMETER | UNIT | UNIT |
|---|---|---|
| Round Cutting Capacity | mm | 320 |
| Flat Cutting Capacity | mm | 610 x 320 |
| Square Cutting Capacity | mm | 320 |
| -60° Round Cutting Capacity | mm | 320 |
| -60° Flat Cutting Capacity | mm | 510 x 320 |
| -60° Square Cutting Capacity | mm | 320 |
| -45 Round Cutting Capacity | mm | 320 |
| -45° Flat Cutting Capacity | mm | 355 x 320 |
| -45° Square Cutting Capacity | mm | 320 |
| -30° Round Cutting Capacity | mm | 260 |
| -30° Flat Cutting Capacity | mm | 280 x 200 |
| -30° Square Cutting Capacity | mm | 225 |
| Main Drive Motor | kW | 2,2 |
| Hydraulic Motor | kW | 1,1 |
| Coolant Pump | kW | 0,12 |
| Cutting Speeds | m/min. | 20 – 100 |
| Band Dimensions | mm | 4160x34x1,1 |
| Working Height | mm | 740 |
| Weight | kg | 2060 |
| Length | mm | 2370 |
| Width | mm | 2400 |
| Height | mm | 1500 |
Each machine has two hydraulic vises: one is a fixed vise and is located close the saw blade; the other is mounted on a movable carriage with a range of 500 mm.
Material to be cut is by the vise mounted on the carriage.
The PLC (Programmable Logic Control) is made by Telemecanique and provides for up to 10 different cutting programs, including cut length and number of pieces to be cut.
With this system, the machine can be programmed for the next schedule even while carrying out the current programm.
Accrancy of cut length is assured by means of a Newall magnetic measuring scale, which is impervious to dirt, oil,grease , chips and the like.
The center of mitre rotation is intersection of the saw blade and the fixed vise jaw; and this insures that there is no change at different angular position.
- Saw Blade 34
- Inverter
- Saw Blade Brash
- Security Switch
- Back Open Vice
- Feeding Vice
- Heavy Duty Gearbox
- PLC Control Panel
- Height Adjustment Switch
- Hydromechnic Blade Tension
- Coolant Pump
- Hydraulic Vice
- To Adjust Degree Panel
- Multiple Segments
- ILC Microspray Device
- Hydraulic Blade Tension
- 3 Mt Roller Table
- Hydraulic Top Clamping
