| PARAMETER | UNIT | UNIT |
|---|---|---|
| Round Cutting Capacity | mm | 230 |
| Flat Cutting Capacity | mm | 320 x 130 |
| Square Cutting Capacity | mm | 230 |
| -45 Round Cutting Capacity | mm | 180 |
| -45° Flat Cutting Capacity | mm | 230 x 100 |
| -45° Square Cutting Capacity | mm | 150 |
| +45° Round Cutting Capacity | mm | 210 |
| +45° Flat Cutting Capacity | mm | 230 x 160 |
| +45° Square Cutting Capacity | mm | 180 |
| +60° Round Cutting Capacity | mm | 120 |
| +60° Flat Cutting Capacity | mm | 120 x 100 |
| +60° Square Cutting Capacity | mm | 100 |
| Main Drive Motor | kW | 1,0 – 1,3 |
| Hydraulic Motor | kW | 0,37 |
| Coolant Pump | kW | 0,12 |
| Cutting Speeds | m/min. | 35 – 70 |
| Band Dimensions | mm | 2730x27x0,9 |
| Working Height | mm | 760 |
| Weight | kg | 430 |
| Lenght | mm | 1350 |
| Width | mm | 700 |
| Height | mm | 1300 |
- Semi-automatic double miter for cutting profiles and solid material in steel and non-ferrous material and excellent price-performance ratio
- Robust constructed monoblock saw frame
- Manually swiveling saw frame with hydraulic clamping for optimal
- Miter (not BMSY 270 DGH )
- Miter on mobile control panel digitally readable (not BMSY 270 DGH )
- Hydraulic clamping of the horizontal vise
- Automatic saw frame raising on the cut end
- Continuously adjustable belt speed 34-68 m / min BMSY 270 DGH / 20-100 m / min BMSY DGH 360 /440 DGH
- Sensitive cutting pressure regulation function of the material properties
- Hydraulic-mechanical belt tension
- Tape guide with hard metal pads sheets and rolls
- Thermal overload protection and no-volt release
- Automatic shut-off after cut end
- Automatic belt break protection Driven
Chip brush on impeller ( not BMSY 270 DGH )
- Saw Blade 27
- Height Adjustment Switch
- Hydromechnic Blade Tension
- Coolant Pump
- Blade Brash
- Metarial Limit Shaft
- Securty Switch
- Control Panel
- Vice
- 3 Mt Material Roller Table
- Inverter
- Microspray Device
