| PARAMETER | UNIT | UNIT |
|---|---|---|
| Round Cutting Capacity | mm | 360 |
| Flat Cutting Capacity | mm | 700 x 360 |
| Square Cutting Capacity | mm | 360 |
| +30° Round Cutting Capacity | mm | 360 |
| +30° Flat Cutting Capacity | mm | 590 x 360 |
| +30° Square Cutting Capacity | mm | 360 |
| +45° Round Cutting Capacity | mm | 360 |
| +45° Flat Cutting Capacity | mm | 450 x 360 |
| +45° Square Cutting Capacity | mm | 360 |
| +60° Round Cutting Capacity | mm | 325 |
| +60° Flat Cutting Capacity | mm | 280 x 360 |
| +60° Square Cutting Capacity | mm | 290 |
| Main Drive Motor | kW | 3 |
| Hydraulic Motor | kW | 0,55 |
| Coolant Pump | kW | 0,12 |
| Cutting Speeds | m/min. | 20 – 100 |
| Band Dimensions | mm | 5200x34x1,1 |
| Working Height | mm | 690 |
| Weight | kg | 1460 |
| Length | mm | 2850 |
| Width | mm | 1300 |
| Height | mm | 1800 |
With movement of bow it’s possible to cut between 90° and +30°.
Cutting capacity at 90° is 360mm x 700mm for flat type and 360 mm for round shaped materials.
With auto height adjustment sensors bow approachs the material with fast speed and hydraulic cutting control allows the bow go up over the material after the cut.
All this process is controlled by digital counter on control panel and total duration for one cut decreases.
Fixing the bow at any angle is controlled by hydraulical brake system and you can control it by another digital counter placed on main body of machine.
- Lineer Metarial Adjustment
- Control Panel
- To Adjust Degree Panel
- Saw Blade 34
- Sensitive Pressure
- Saw Blade Brash
- Security Switch
- Hydromecanic Blade Tension
- Optical Height Adjustment
- Lineer Way
- To Adjust Degree Panel
- Heavy Duty Gearbox
- Hydraulic Vice
- 3 inclined Blade
- Inverter
- ILC Microspray Device
- Hydraulic Blade Tension
- 3 Mt Motorized Roller Table
- 3 Mt Material Roller Table
- Chip Conveyor
- Lazer Line Pointer
- Hydraulic Top Clamping
