CUBO 300-NC
CNC automatic bandsaw,hydraulically driven. Mitre cutting from 0° to 45° left in automatic cycle and from 0° to 60° left in semiautomatic cycle. CUBO 300-NC is an Industry 4.0 tool and has the possibility to use it remotely.
- Easy stops at 0°, graduated plate to identify different angles.
- High blade tensioning 1700 kg / cm² to increase cutting accuracy and reduce cutting time.
- Up to 99 different cutting lengths and number of cuts can be memorized, with the possibility to repeat them more than once.
- CNC with programming of all operations; automatic calculation of the blade thickness.
- Machine status shown on display, including blade speed, piece counter, and working anomalies. setting of the cutting lengths, minimal scrap-end 210 mm. Connection for loading
- table with 2 vertical rollers, unloading slide, connection for unloading table for cutting pieces.
- Main switch with minimum tension coil, emergency button, thermic and magnetic motor protection.
- Cutting capacity : round till 255 mm., square till 240 mm. and rectangular till 300×180 mm.
*The modem for Industry 4.0, teleservice and remote control is supplied as an optional
