H 601
Semiautomatic twin column bandsaw, hydraulically driven. Especially adapt to cut sections of steelwork, tubes and solids.
- Possibility to make cuts with variable angle up to 60° to the left, with the manual shifting of the saw frame.
- Steel sawframe with tubular section; worktable supported by a central pivot with preloaded bearings.
- Sawframe movement onto an electro welded column of big dimension, through two recirculating ballscrews linear guides.
- Pulley diameter 520 mm. Long-Life monobloc motoreducer.
- Registrable band guides with hard metal pads and guided bearings.
- Electronic Inverter for variable blade speed.
- Automatic control of the beginning and end cut through a feeler pin; regulation of the descent of the arc and strength of the penetration through the console.
- Mechanical tensioning of the blade with a control micro switch.
- Sawframe canted 6° allows sawblade to freely and easily cut through the bottom of structural section without vibration, binding, or slowdown of sawing rates.
- Cutting capacity at 90 °, round till 120 mm., square till 100 mm., rectangular till 180×100 mm.
