| Area angular cut | ° | 90 |
| Cutting capacity at 90°: round / square / rectangular | mm. | 680 / 640 / 820×610 |
| Cutting capacity at 90°: rectangular with cutting bundle | mm. | 800×350 |
| Blade dimensions | mm. | 7960 x 41 x 1.3 |
| Blade Motor Power | KW | 5.5 |
| Run of the feeder carriage (repeatable) | mm. | 1500 or 3000 |
| Feeder motor power | KW | 1.5 |
| Scrap end | mm. | 150 |
| Blade speed | mt/min. | 15 ÷ 100 |
| Motor hydraulic unit | KW | 1.5 |
| Tank Capacity of the hydraulic unit | Lt | 20 |
| Capacity coolant tank | Lt | 3 |
| Dimensions ( B x L x H ) | mm. | 5850x3600x2700 ( F3000 ) |
| Height of the work-table | mm. | 820 |
| Weight | Kg | 4460 ( F3000 ) |
| Minimum cuttable length | mm. | 30 |
| Type of functioning | semiautomatic/automatic CNC | |
| Suitable for cutting: | Steel / cast iron / high-strength steels |
H 800 NC F 1500-3000
Fully automatic CNC twin column bandsaws for straight cut only, with hydraulic lowering of the bow. Conceived and projected especially for cutting profiles structural steel work beams, tubes and also solids.
- The CNC driver allows to set and memorize more than 90 cutting programs, with different cutting lengths and quantities.
- Display LCD for visualization of: the cutting phases and working anomalies.
- The speed of feeding and the force of cutting can be regulated by the console.
- Registrable band guides with hard metal pads and guided bearings.
- The mobile band guide is automatically kept as near as possible to the cutting area.
- Electronic Inverter for variable blade speed.
- “Clean cut” due to cooling system with minimal lubrication to cut long pipe and profile without any leakage of coolant.
- Cutting capacity at 90 °: Round 680 mm., square 640 mm. Rectangular 820 x 610.
*The modem for Industry 4.0, teleservice and remote control is supplied as an optional
