| PARAMETERS | UNIT | UNIT |
| Axes diameter | mm | 40 |
| Useful length of axes | mm | 74 |
| Distance between the centers of the lower axes | mm | 286 |
| Maximum bending capacity on round tube | inches/mm | 3 inches or 76.2 mm. |
| Motor power | kW/CV | 1,1 KW / 1.5CV. |
| 3 phase voltage | V | 230/400 |
| Roller speed | RPM | 8 |
Characteristics :
- Safe transmision by treated and flat pinions.
- Steel treated and rectified axis.
- It’s equipped with 9 standard rollers and washers by means of which you can make all kinds of profiles. (Square pipe, rectangular, solid square bar, round and rectangular, U profile, T profile, angle, flat bar, edge flat bar,…).
- Course end with a millimeter scale which allows adjusting the bending limits in a simple, practical and reliable way.
- Vertical and Horizontal working position in the same table.
- Side corrector rollers to rule the bending operation and make spiral bendings.
