| Area angular cut | ° | -30 / 90 / +30 |
| Cutting capacity at 90°: round / square / rectangular | mm. | 680 / 640 / 1250×600 |
| Cutting capacity at 90°: rectangular with cutting bundle | mm. | 800×350 |
| Blade dimensions | mm. | 8140 x 54 x 1.6 |
| Inclination of the blade | ° | 6 |
| Blade Motor Power | KW | 5.5 |
| Run of feeder carriage (repeatable) | mm. | 3000-6000 |
| Feeder motor power | KW | 1.5 |
| Scrap end | mm. | 150 |
| Blade speed | mt/min. | 15÷90 |
| Motor hydraulic unit | KW | 1.5 |
| Tank Capacity of the hydraulic unit | Lt | 80 |
| Capacity coolant tank | Lt | 3 |
| Dimensions ( B x L x H ) | mm. | 5750x4200x2750 ( F3000 ) |
| Height of the work-table | mm. | 850 |
| Weight | Kg | 5300 ( F3000 ) |
| Minimum cuttable length | mm. | 30 |
| Type of functioning | semiautomatic/automatic CNC | |
| Suitable for cutting : | Steels / cast iron / high-strength steels / alloys |
KTECH 1202 F 3000-6000
Automatic upright band saws, suitable for cutting medium and large sections and solids, equipped with numerical control for motorized arc rotation management from 60 ° right to 60 ° left and programming of the carriage length.
- The arc in electro-welded steel with a thick section guarantees the absolute lack of vibrations.
- The movement of the arch is perfectly balanced and guaranteed by the large diameter hydraulic cylinder.
- The numerical control allows you to set and store over 90 cutting programs, with different quantities, lengths, and angles.
- Programming keyboard integrated with CNC, positioned on a mobile console, LCD display for visualization of the work phases and self-diagnosis.
- The rotation of the arc takes place on large preloaded bearings via gearmotor and self-braking motor with encoder for reading the position. The automatic locking of the arc rotation is hydraulic.
- Vertical hydraulic presser to optimize material locking and avoid vibrations during cutting (Optional).
- Refrigeration of the blade with minimal standard lubrication, to make cuts on profiles and pipes without the inconvenience of dispersing the traditional liquid typical of cuts over significant lengths.
- Energy-saving hydraulic power unit as standard, during the execution of the cut and in the phases in which no hydraulic pressure is required, the power unit switches off, thus guaranteeing a considerable energy saving.
- 90 ° size: round 520 mm., Square 450 mm., Rectangle 680 x 400
* The Industry 4.0 system with modem for teleservice and remote management is available as an option
