Description
| PARAMETERS | UNIT | UNIT |
| Axes diameter | mm | 40 |
| Useful length of axes | mm | 74 |
| Distance between the centers of the lower axes | mm | 286 |
| Maximum bending capacity on round tube | inches/mm | 2 inches and a half or 63.5 mm. |
| Motor power | kW/CV | 1,1 KW / 1.5CV. |
| 3 phase voltage | V | 230/400 |
| Roller speed | RPM | 8 |
Characteristics :
- It’s got two traction rollers. The two lower rollers are knurled and motorized to achieve a better traction.
- Safe transmision by treated and flat pinions.
- Steel treated and rectified axis.
- Bending regulation by means of the upper axis which permits to make bending operations in big pipes and profiles diameters without any distortion.
- It’s equipped with 9 standard rollers and washers by means of which you can make all kinds of profiles. (Square pipe, rectan-gular, solid square bar, round and rectangular, U profile, T profile, angle, flat bar, edge flat bar,…).
- Millimeter scale in the upper axis to regulate bending.
- Vertical and Horizontal working position in the same table.
- Side corrector rollers to rule the bending operation and make spiral bendings.
- Lower bench palletized to easily transport the machine to the workplace or store it in case of lacking space.
- The machine is shipped fully assembled, you only need to connect it to the power supply.
- Palet made of steel and 3 layer cardboard box suitable for seafreight.
- Optional: Fumigated wooden box ISPM15.
