| CAPACITY | METRIC | IMPERIAL | |
| Distance between centres | 762 mm | 30″ | |
| Swing over bed | 410 mm | 16.14″ | |
| Swing over cross slide | 240 mm | 9.44″ | |
| Swing in gap | 595 mm (OPT) | 23.42″ (OPT) | |
| Length of gap in front of face plate | 155 mm | 6.10″ | |
| Centre height | 205 mm | 8.07″ | |
| Bed width | 300 mm | 11.81″ | |
| HEADSTOCK | |||
| Spindle bore | 52 mm | 2.04″ | |
| Spindle nose | D1-6 | D1-6 | |
| Spindle taper in nose | MT6 | MT6 | |
| Spindle taper in sleeve | MT4 | MT4 | |
| Speed range (12-step) | 30 – 2000 rpm | 30 – 2000 rpm | |
| CARRIAGE & COMPOUND | |||
| Cross slide travel | 240 mm | 9.44″ | |
| Compound rest travel | 120 mm | 4.72″ | |
| Leadscrew diameter, thread | ø1 1/4″, 4 TPI | ø1 1/4″, 4 TPI | |
| THREADS & FEEDS | |||
| Imperial pitches 40 Pos | 2-56 TPI | 2-56 TPI | |
| Metric pitches 52 Pos | 0.4-14 mm | 0.4-14 mm | |
| Diametral pitches 32 Pos | 4-56 DP | 4-56 DP | |
| Module pitches 44 Pos | 0.4-7 MP | 0.4-7 MP | |
| Cross feeds 40 Pos | 0.016-0.449 mm/rev | 0.0006-0.0126″/rev | |
| Longitudinal feeds 40 Pos | 0.032-0.898 mm/rev | 0.0012-0.0252″/rev | |
| TAILSTOCK | |||
| Quill diameter | ø54 mm | ø2.12″ | |
| Quill travel | 130 mm | 5.11″ | |
| Quill taper | MT4 | MT4 | |
| MOTORS | |||
| Spindle motor | 5hp | 5hp | |
| Coolant pump | 1/8hp | 1/8hp | |
| GENERAL | |||
| Electrical rating | 600V 7.5Amp 3Ph 60Hz | 600V 7.5Amp 3Ph 60Hz | |
| Electrical approval | CSA | CSA | |
| Weight | 1575 kg | 3472 lb | |
| The manufacturer reserves the right to modify the design, specifications and/or colour of the machine without prior notice. | |||
TY-1630S
One piece Meehanite cast base.
Hardened and precision ground gears and bed ways.
The cross slide is induction hardened to HRC 52° and precision ground.
The slideways between the saddle and bed are TURCITE B coated, reducing friction and saving on power consumption.
