| CAPACITY | METRIC | IMPERIAL | |
| Distance between centres | 1600 mm | 62.99″ | |
| Swing over bed | 460 mm | 18.11″ | |
| Swing over cross slide | 288 mm | 11.33″ | |
| Swing in gap | 640 mm | 25.19″ | |
| Length of gap in front of face plate | 180 mm | 7.08″ | |
| Centre height | 230 mm | 9.05″ | |
| Bed width | 300 mm | 11.81″ | |
| HEADSTOCK | |||
| Spindle bore | 60 mm | 2.36″ | |
| Spindle nose | D1-6 | D1-6 | |
| Spindle taper in nose | MT6 | MT6 | |
| Spindle taper in sleeve | MT4 | MT4 | |
| Speed range H | 100 – 2000 rpm | 100 – 2000 rpm | |
| Speed range M | 35 – 680 rpm | 35 – 680 rpm | |
| Speed range L | 15 – 220 rpm | 15 – 220 rpm | |
| CARRIAGE & COMPOUND | |||
| Cross slide travel | 265 mm | 10.43″ | |
| Compound rest travel | 135 mm | 5.31″ | |
| Leadscrew diameter, thread | ø1 3/8″, 4 TPI | ø1 3/8″, 4 TPI | |
| THREADS & FEEDS | |||
| Imperial pitches 60 Pos | 2-112 TPI | 2-112 TPI | |
| Metric pitches 60 Pos | 0.2-14mm Pitch | 0.2-14mm Pitch | |
| Diametral pitches 50 Pos | 4-112 DP | 4-112 DP | |
| Module pitches 50 Pos | 0.2-7 MP | 0.2-7 MP | |
| Cross feeds 50 Pos | 0.0185-0.52mm/rev | 0.0007-0.01935″/rev | |
| Longitudinal feeds 50 Pos | 0.037-1.04mm/rev | 0.0014-0.0387″/rev | |
| TAILSTOCK | |||
| Quill diameter | ø60 mm | ø2.36″ | |
| Quill travel | 150 mm | 5.90″ | |
| Quill taper | MT4 | MT4 | |
| MOTORS | |||
| Spindle motor | 10hp | 10hp | |
| Coolant pump | 1/8hp | 1/8hp | |
| GENERAL | |||
| Electrical rating | 220V 30Amp 3Ph 60Hz | 220V 30Amp 3Ph 60Hz | |
| Electrical approval | CSA | CSA | |
| PHSR exemption letter | |||
| Weight | 2000 kg | 4409 lb | |
| The manufacturer reserves the right to modify the design, specifications and/or colour of the machine without prior notice. | |||
TY-2000
Hardened and precision ground gears and bed ways.
The cross slide is induction hardened to HRC 52° and precision ground.
The slideways between the saddle and bed are TURCITE B coated, reducing friction and saving on power consumption.
Two speed tailstock is standard.
