| CAPACITY |
METRIC |
IMPERIAL |
| Distance between centres |
3060 mm |
120.47″ |
| Swing over bed |
660 mm |
25.98″ |
| Swing over cross slide |
430 mm |
16.92″ |
| Swing in gap |
820 mm |
32.25″ |
| Length of gap in front of face plate |
320 mm |
12.58″ |
| Centre height |
330 mm |
12.99″ |
| Bed width |
400 mm |
15.74″ |
| HEADSTOCK |
|
|
| Spindle bore |
105 mm |
4.13″ |
| Spindle nose |
D1-11 |
D1-11 |
| Spindle taper in nose |
MT8 |
MT8 |
| Spindle taper in sleeve |
MT5 |
MT5 |
| Speed range (12-step) |
15 – 1200 rpm |
15 – 1200 rpm |
| CARRIAGE & COMPOUND |
|
|
| Cross slide travel |
380 mm |
14.96″ |
| Compound rest travel |
255 mm |
10.03″ |
| Leadscrew diameter, thread |
ø1 1/2″, 4 TPI |
ø1 1/2″, 4 TPI |
| THREADS & FEEDS |
|
|
| Imperial pitches 60 Pos |
2-112 TPI |
2-112 TPI |
| Metric pitches 60 Pos |
0.2-14mm |
0.2-14mm |
| Diametral pitches 50 Pos |
4-112 DP |
4-112 DP |
| Module pitches 50 Pos |
0.2-7 MP |
0.2-7 MP |
| Cross feeds 50 Pos |
0.0185-0.52mm/rev |
0.0007-0.01935″/rev |
| Longitudinal feeds 50 Pos |
0.037-1.04mm/rev |
0.0014-0.0387″/rev |
| TAILSTOCK |
|
|
| Quill diameter |
ø75 mm |
ø2.95″ |
| Quill travel |
160 mm |
6.29″ |
| Quill taper |
MT5 |
MT5 |
| MOTORS |
|
|
| Spindle motor |
15hp |
15hp |
| Coolant pump |
1/8hp |
1/8hp |
| GENERAL |
|
|
| Electrical rating |
600V 20Amp 3Ph 60Hz |
600V 20Amp 3Ph 60Hz |
| Electrical approval |
CSA |
CSA |
|
|
|
| Weight |
3080 kg |
6790 lb |
| The manufacturer reserves the right to modify the design, specifications and/or colour of the machine without prior notice. |
