| Area angular cut | ° | 90 |
| Cutting capacity at 90°: round / square / rectangular | mm. | 310 / 310 / 340×310 |
| Cutting capacity at 90°: rectangular with cutting bandle | mm. | 340×250 |
| Blade dimensions | mm. | 3730 x 34 x 1.1 |
| Inclination of the Blade | ° | 0 |
| Blade Motor Power | KW | 3 |
| Run of feeder carriage (repeatable) | mm. | 500 |
| Feeder motor power | KW | 0.75 |
| Scrap end | mm. | 100 |
| Blade speed | mt/min. | 15÷100 |
| Motor Hydraulic Unit | KW | 0.75 |
| Capacity Tank of Hydraulic Unit | Lt | 20 |
| Capacity Coolant Tank | Lt | 50 |
| Dimensions ( B x L x H ) | mm. | 1950x1755x1965 |
| Height of the Working-table | mm. | 922 |
| Weight | Kg | 1650 |
| Minimum cuttable length | mm. | 10 |
| Type of Functioning | semiautomatic/automatic CNC | |
| Suitable for Cutting | Steel / cast iron / high-strength steels / alloys |
XSMART 3
Automatic hydraulic double column saw with robust mechanical structure associated with advanced technology, the new XSMART3 responds for automatic high production series
- CNC control for programming multiple lengths and quantities on the same bar
- Feeder carriage with bridge structure and roller conveyor for material support
- Material feed by the electric motor and recirculating ballscrews
- Double vice for clamping the workpiece before and after the blade
- Pulleys Inclination of 30 degrees allows to extend the life of the blade
- Double column saw frame with sliding on linear guides recirculating balls
- Sliding of the mobile blade guide on linear guides and recirculating ballscrews, with automatic approach of the workpiece
- Sensor for automatic detection of the start cut point
- Standard vice pressure adjustment
- Standard cutting pressure adjustment
- Mobile console
- Led light for lighting the working area
- Completely covered with easy access for maintenance
- Electric conveyor chips
- Final scrap-end 100 mm
- Washing Gun
- Double Clamp Bridge feeder structure with roller tables support
- Cleaning motorized brush
- Modem for teleservice and remote control is supplied as an optional
