| Area angular cut | ° | 90 |
| Cutting capacity at 90°: round / square: | mm. | 360 / 360 |
| Cutting capacity at 90°: rectangular with cutting bandle | mm. | 360×350 |
| Blade dimensions | mm. | 5900 x 41 x 1.3 |
| Inclination of the Blade | ° | 0 |
| Blade Motor Power | KW | 5.5 |
| Run of feeder carriage (repeatable) | mm. | 500 |
| Feeder motor power | KW | 1.5 |
| Scrap end | mm. | 20 |
| Blade speed | mt/min. | 15÷150 |
| Motor Hydraulic Unit | KW | 3 |
| Capacity Tank of Hydraulic Unit | Lt | 60 |
| Capacity Coolant Tank | Lt | 100 |
| Dimensions ( B x L x H ) | mm. | 2800x1794x2210 |
| Height of the Working-table | mm. | 877,5 |
| Weight | Kg | 3.500 |
| Minimum cuttable length | mm. | 15 |
| Type of Functioning | semiautomatic/automatic CNC | |
| Suitable for Cutting | Steel / cast iron / high-strength steels / alloys |
XT4
High production twin column bandsaws, XT4 is suitable for a variety of cutting requirements,combining advanced technology with an extremely solid mechanical structure.
- It has one system that allows the vices to ‘back off’ to avoid the blade rubbing on the cut surface during the ascent of the sawframe for the following cut.
- The added advantage of this design enables the use of high performance TCT bandsaw blades. Hydraulically pressure of ground TCT blade guides for maximum precision and squareness of cut.
- With the option “Short Batch & ‘One Off’ Sawing” there is the possibility to cut not completely the material section in automatic cycle.
- Automatic Trim Cut option, if the material has an accettable pre sawn face, it will be accurately & automatically located relative to the blade ‘zero’position. This feature saves time and cuts down on material wastage.
- All operating functions of the machine, errors and problem solving messages are clearly displayed.
- A device for checking the accuracy/ squareness of the cut, with automatic adjustment or stopping of the sawframe descent speed in the event of blade deviation.
- Cutting capacity at 90 °: Round and square 360 mm.
*The modem for Industry 4.0, teleservice and remote control is supplied as an optional
