BMSO-650CH NC

 

Fully automatic linear path for cutting solid stocks, tubes and profiles in steel, light cast iron and non-ferrous for a cut at only 90°.

Made entirely of steel. The rear jaw contains a number of hardened rollers driven by a worm gear and a wheel by an electric motor.

The front vise consists of a number of free rollers.

A limit switch mounted on the vise stops the machine when the block is exhausted.

Once the workpiece is clamped between the rollers, no further tightening is necessary.

The workpiece is conveyed through the vise to the bar stop which contains a micro-switch controlling the bar feed motor.

A parts counter monitors the number of cuts. The machines stop automatically when the blade breaks.

The machines are equipped with a removable coolant reservoir incorporating an electric submerged coolant pump that supplies coolant to both guide assemblies.

 

 

 

Contact us
Categories: , , ,

Request a quote

  • Hidden
  • Hidden
  • Hidden

Description

SETTINGS UNIT UNIT
Round cutting capacity mm 650
Flat cutting capacity mm 1050 x 600
Square cutting capacity mm 600
Main drive motor kW 7,5
Coolant pump kW 0,12
Hydraulic motor kW 4
Chip conveyor motor kW 0,25
Cutting speeds m/min 20 – 100
Bracelet dimensions mm 8400x54x1.6
Working height mm 825
Weight kg 6580
Length mm 4250
Width mm 1750
Height mm 2600
  • Blade inclined at 6°
  • ILC microspray device
  • 3Mt Material Roller Table
  • Several segments
  • Hydraulic upper clamping
  • Hydraulic split vise
  • Proximity switch to detect blade slippage
  • Saw blade 41
  • Optical height adjustment
  • Pressure adjustment
  • Coolant pump
  • Safety switch
  • Robust gearbox
  • Hydraulic rear vise included
  • Hydraulic power supply vice
  • PLC control panel
  • Hydraulic vice
  • line path
  • Synchronization arm/moving vise
  • Inverter

• Fully automatic NC bandsaw for sawing thick-walled profiles and solid materials
• Robust one-piece saw frame with hydraulic vertical movement and linear guide
• 500 mm feed length in a single feed train
• Input of cutting length and average number of cuts via Siemens NC (programmable logic controller) for
10 different programs
• Continuously adjustable band speed 20–100 m/min
• Hydraulic-mechanical belt tensioning
• Automatic machine stop in case of band breakage
• Precise measurement of slide position on magnetic scale
• Sensitive cutting pressure regulation function for material properties
• Eilvorlauf saw frame with automatic saw feed during transitions (light sensor)
• Automatic feed arm adjustment, synchronous with hydraulic clamping of the horizontal vise
• Band guide with hard metal buffer sheets and rollers
• Automatic belt break protection
• Wheel-driven chip brush

Similar products