BS 400/60 AFI-NC

 

CNC automatic bandsaw, hydraulically driven; miter cutting from 0° to 60° left.

  • Hydraulic fixed vice with pressure reducer, anti-burr hydraulic vertical vice on the unloading side.
  • Adjustment of the blade tension from the front side of the sawframe, checked by an endstroke.
  • Mechanical device (position sensor) that allows the sawframe to lower quickly toward the material and automatically detect the start-cut point. Blade guides with hard metal pads, additional bearing for blade alignment.
  • Up to 99 different cutting lengths and number of cuts can be memorized, with the possibility to repeat them more than once.
  • CNC driver with programming of all operations; machine status shown on display.
  • Feeder movements on chrome bars, high-precision of the positioning due to the incremental feeding on recirculating ball screw by self-braking electric motor with inverter.
  • Automatic calculation of the blade thickness. Feeder with 400 mm opening, maximum single stroke 515 mm.
  • Electronic Inverter for variable blade speed and motor with supplementary servo-ventilation.
  • Improvement of cutting performance due to blade size 34 mm.
  • Cutting Capacity: rounds till 310 mm., square till 280 mm. and rectangular till 400×250 mm.
    *The modem for Industry 4.0, teleservice and remote control is supplied as an optional
Contact us
Categories: , , Tag:

Request a quote

  • Hidden
  • Hidden
  • Hidden

Description

Area angular cut ° 90 +30
Cutting capacity at 90°: round / square / rectangular mm. 310 / 280 / 400×250
Cutting capacity at 90°: rectangular with cutting bandle mm. max 300×120 min 120×20
Blade dimensions mm. 4020 x 34 x 1.1
Blade Motor Power KW 2.2
Run feeder carriage (repeatable) mm. 515
Power motor feeder KW 0.75
Scrap end mm. 80
Blade speed mt/min. 18 ÷ 100
Motor hydraulic unit KW 0.75
Tank Capacity of the hydraulic unit Lt 20
Dimensions (W x L x H) mm. 1850x2200x1990
Height of the work table mm. 890
Weight kg 990
Minimum cuttable length mm. 4
Type of functioning semi-automatic/automatic CNC
Suitable for cutting: Steel/cast iron/high-strength steels

Similar products

Label

BS 400/60 AFI-NC

 

Automatic electronic saw with numerically controlled hydraulic operation for cutting from 0° to 60° left in automatic cycle.

Fixed hydraulic vise with pressure reducer.

 

 

 

 

Contact us
Categories: , , , Tag:

Request a quote

  • Hidden
  • Hidden
  • Hidden

Description

Angular section area ° 90 +30
90° cutting capacity: round / square / rectangular mm. 310 / 280 / 400×250
90° rectangular cutting capacity with bundle cutting: mm. max 300×120 min 120×20
Ribbon dimensions mm. 4020 x 34 x 1.1
Blade motor power kW 2.2
Forward carriage travel (repeatable) mm. 515
Forward motor power kW 0.75
Minimum residue mm. 80
Blade speed m/min 18 ÷ 100
Hydraulic unit motor kW 0.75
Hydraulic unit reservoir capacity L 20
Dimensions (Length x Width x Height) mm. 1850x2200x1990
Worktop height mm. 890
Weight kg 990
Minimum cutting length mm. 4
Type of operation semi-automatic/automatic CNC
Suitable for cutting: Steels / cast iron / high-strength steels
  • Adjustment of ribbon tension on the front part of the bow, controlled by a limit switch.
  • Very high tape tension of 2,000 kg/cm², with front regulation and micro control switch.
  • Blade guides with hard metal parts and bearings on the front blade guide. Up to 99 program lines can be programmed and stored, with varying lengths and quantities.
  • CNC programming from the control panel of all the machine's operational functions.
  • Mechanical device (feeler) which allows the bow to descend quickly onto the material to be cut and automatic raising of the starting point of the cut.
  • Feeder with 400 mm vise opening, 515 mm single stroke, 4 mm minimum stroke, 80 mm minimum waste.
  • Rigid steel bow with tubular section and 360 mm pulleys.
  • Hydraulic vertical anti-burr vise on the discharge side.
  • Standard electronic speed variator on the machine.
  • Very high positioning accuracy thanks to a gradual feed with ball screw and self-braking motor with reversing, feed carriage bar sliding on chromed guides.
  • High performance, thanks to the 34mm high ribbon.
  • 90° cutting of rounds up to 310 mm, squares up to 280 mm, and rectangles up to 400 x 250 mm.
    *Modem for Industry 4.0, remote service, and remote management are available as options.

Similar products