Description
| SETTINGS | UNIT | UNIT |
| Maximum capacity on round S275 steel tube | mm | 60.3 mm or 2" program-40 or 2" 1/4 x 4 mm |
| Maximum capacity on aluminum tube | mm | 60.3 mm x 8 mm |
| Maximum capacity on 304/316 | mm | 60.3 mm x 3 mm |
| Maximum capacity on square tube | mm | 40 x 40 x 4 mm |
| Automatic rotation speed | rpm | 1.1 to 3.5 revolutions/min |
| Maximum folding angle | degrees | 180 degrees |
| Minimum radius of curvature | 3x the tube diameter | |
| Maximum radius of curvature | mm | 320 |
| Repeatability of the degree of flexion | degree | +/- 0.1 degree |
| Reinforcing arm for tubes | mm | diameter greater than 40 mm inclusive |
| BEND lubricant | ml | 8 x 400ml included |
| Engine power | kW/HP | 1.1 kW / 1.5 hp |
| Electrical voltage | v / Hz | 230 V single phase 50/60 Hz |
| Intensity | HAS | 5 |
| Machine weight | kg | 360 |
Features :
- Two folding directions, right and left, to facilitate bending.
- Rapid die change system: 60 seconds maximum.
- Industry 4.0
- CNC control with 7" touchscreen, more than 20 selectable languages.
- Safety pedal on the right and left.
- Side shelves for storing the matrices.
- All dies are made of hardened steel to prevent wear.
- The counter-forms are made of bronze-aluminum alloys to prevent marks on the outer face of the bending.
- Recording of 10,000 programs.
- Programming of 50 different angles on the same part.
- Programming of measurement units in inches or millimeters.
- Swivel trolley with automatic release which facilitates the removal of the equipment.
- Automatic and programmable springback correction.
- Lower frame placed on a pallet to allow the machine to be transported to the workplace or stored.
- The CC60 tube bender is delivered fully assembled.
- Iron pallet and triple-layer cardboard box suitable for maritime transport.
- Optional: NIMF15 compliant wooden packaging.
- All capacities are based on the ASTM A-53 Grade A carbon steel tube standard with a maximum tensile strength of 330 MPa. Thicker walls and stronger materials will reduce the machine's capacity. Check with your equipment supplier for specific details.
