TY-2500

Features

  • Hardened and precision ground gears and bed ways.
  • The cross slide is induction hardened to HRC 52° and precision ground.
  • The slideways between the saddle and bed are TURCITE B coated, reducing friction and saving on power consumption.
  • Two speed tailstock is standard.
Contact us
Categories: , , , Tag:

Request a quote

  • Hidden
  • Hidden
  • Hidden

Description

CAPACITY METRIC IMPERIAL
Distance between centers 1145 mm 45.07″
Swing over bed 460 mm 18.11″
Swing over cross slide 288 mm 11.33″
Swing in gap 640 mm 25.19″
Length of gap in front of face plate 180 mm 7.08″
Centre height 230 mm 9.05″
Bed width 300 mm 11.81″
HEADSTOCK
Spindle bore 60 mm 2.36″
Spindle nose D1-6 D1-6
Spindle taper in nose MT6 MT6
Spindle taper in sleeve MT4 MT4
Speed ​​range H 125 – 2500 rpm 125 – 2500 rpm
Speed ​​range M 40 – 850 rpm 40 – 850 rpm
Speed ​​range L 15 – 275 rpm 15 – 275 rpm
CARRIAGE & COMPOUND
Cross slide travel 265 mm 10.43″
Compound rest travel 135 mm 5.31″
Leadscrew diameter, thread ø1 3/8″, 4 TPI ø1 3/8″, 4 TPI
THREADS & FEEDS
Imperial pitches 60 Pos 2-112 TPI 2-112 TPI
Metric pitches 60 Pos 0.2-14mm Pitch 0.2-14mm Pitch
Diametral pitches 50 Pos 4-112 DP 4-112 DP
Module pitches 50 Pos 0.2-7 MP 0.2-7 MP
Cross feeds 50 Pos 0.0185-0.52mm/rev 0.0007-0.01935″/rev
Longitudinal feeds 50 Pos 0.037-1.04mm/rev 0.0014-0.0387″/rev
TAILSTOCK
Quill diameter ø60 mm ø2.36″
Quill travel 150 mm 5.90″
Quill taper MT4 MT4
MOTORS
Spindle motor 10hp 10hp
Coolant pump 1/8hp 1/8hp
GENERAL
Electrical rating 220V 30Amp 3Ph 60Hz 220V 30Amp 3Ph 60Hz
Electrical approval CSA SPE-1000 CSA SPE-1000
PHSR exemption letter valid in Ontario valid in Ontario
Weight 1970 kg 4343 lb
The manufacturer reserves the right to modify the design, specifications and/or color of the machine without prior notice.

Similar products

TY-2500

 

Features :

  • Hardened and precision gears and bed tracks.
  • The cross slide is induction hardened to HRC 52° and precision ground.
  • The slides between the saddle and the bed are coated with TURCITE B, which reduces friction and reduces energy consumption.
  • The two-speed sliding headstock is standard.

 

 

 

Contact us
Categories: , , , Tag:

Request a quote

  • Hidden
  • Hidden
  • Hidden

Description

ABILITY METRIC IMPERIAL
Distance between centers 1145 mm 45.07″
Rocking on the bed 460 mm 18.11″
Swing over cross slide 288 mm 11.33″
Swing in gap 640 mm 25.19″
Length of the space in front of the front plate 180 mm 7.08″
Centre height 230 mm 9.05″
Bed width 300 mm 11.81″
HEADSTOCK
spindle bore 60 mm 2.36″
brooch nose D1-6 D1-6
Cone of wire in the nose MT6 MT6
Spindle cone in the socket MT4 MT4
Speed ​​range H 125 to 2500 rpm 125 to 2500 rpm
Speed ​​range M 40 to 850 rpm 40 to 850 rpm
Speed ​​range L 15 to 275 rpm 15 to 275 rpm
TRANSPORT AND COMPOUND
Cross-slip travel 265 mm 10.43″
Relaxing trip composed 135 mm 5.31″
Diameter of headless screw, thread ø1 3/8″, 4 TPI ø1 3/8″, 4 TPI
THREADS AND FOOD
Imperial Locations 60 Pos 2-112 TPI 2-112 TPI
Not metric 60 Pos Pitch from 0.2 to 14 mm Pitch from 0.2 to 14 mm
Diametral locations 50 Pos 4-112 DP 4-112 DP
No 50 Pos module 0.2-7 MP 0.2-7 MP
Cross advance 50 Pos 0.0185-0.52 mm / turn 0.0007-0.01935″ / rev
Longitudinal advances 50 Pos 0.037-1.04 mm / revolution 0.0014-0.0387″ / rev.
TAILSTOCK
Pen diameter ø60 mm ø2.36″
Quill Trip 150 mm 5.90″
Quill taper MT4 MT4
ENGINES
Spindle motor 10hp 10hp
Coolant pump 1/8hp 1/8hp
GENERAL
Electricity tariff 220V 30Amp 3Ph 60Hz 220V 30Amp 3Ph 60Hz
Electrical approval CSA CSA
Weight 1970 kg 4343 lb
The manufacturer reserves the right to change the design, specifications and/or color of the machine without prior notice.

Similar products