Description
| Model | V520 PC / CNC | |
|---|---|---|
| Table | Table size | 1500 x 450 mm |
| 3-axis X/Y/Z movement | 1100/500/500 mm | |
| T-slot (size x number x distance) | 18 x 5 x 80 | |
| 3-axis rapid feed speed | 25 ~ 1500 (30 ~ 6000 on PC) | |
| 3 feed cutting axes | 1500 (30 ~ 6000 on PC) | |
| Cutting range reference | The cutting length | 1100 |
| Cutting width | 490 | |
| Cutting height | 500 | |
| Loading weight | 1000 | |
| Cutting range reference | Spindle speed (60Hz) | 45-1500 rpm variable |
| Spindle cone | NT50 | |
| Distance between the spindle nose and the table surface | 100-600 | |
| Spindle center for sliding the surface distance | 520 | |
| Pen feed speed | N / A | |
| Turret head pivot angle | N / A | |
| Quill Trip | N / A | |
| horizontal spindle | Spindle speed (60Hz) | N / A |
| Spindle cone | N / A | |
| Distance from the center of the spindle to the table surface | N / A | |
| Distance between the spindle nose and the edge of the table | N / A | |
| Engine | Spindle motor | 10HP X 4P AC |
| X-axis feed motor | 0.75 kW | |
| And shaft feed motor | 0.75 kW | |
| Z-axis feed motor | 0.75 kW | |
| Dimensions | Net weight | 3800kg |
| Gross weight | 4600kg (40”HQ) | |
| Floor plan (L x W x H) | 3500 x 2900 x 2900 | |
All specifications and designs are subject to change without notice.
CNC bed-type milling / PC-based
Standard accessories:
- Syntec PC-based controller
- 3-axis ball screw
- Coolant reservoir and chip guard
- Vertical air-powered pull-up bar
- Horizontal air-powered pull-up bar
- Automatic lubrication system
- Cooling system
- Telescopic cover
- Leveling pad
- Leveling screw
- Working condition lighting
- RS232 Interface
- Transform (export only)
CNC bed-type milling / PC-based
Optional accessories:
- Mitsubishi or Fanuc controller
- Magnetic chuck
- 4th axis rotary table (manual)
- Half-cover for work table
- 3-axis DRO (Fagor brand)
- CE standard
- Equipped with an integrated automatic lubrication system
- Equipped with a cooling system
- Each axis of movement is equipped with limit switches to ensure safety.
- The X, Y axis is laterally covered with low-friction TURCITE-B material.
- Standard electrical and electronic components are used. Electrical and electronic circuits are properly concealed.
- The controls are integrated on a panel, improving simple and easy operation, thus avoiding fatigue and increasing work efficiency.
- Power supply change with inverter for variable speed change with a design that is easy to change speeds.
