| PARAMETERS | UNIT | UNIT |
| Maximum capacity on round steel tube S275 | mm | 88,9mm o 3” Schedule-40 o 3” 1/2 x 6mm. |
| Maximum capacity on aluminum tube | mm | 88,9mm x 10 mm |
| Maximum capacity on 304/316 | mm | 88,9mm x 4mm |
| Maximum capacity on square tube | mm | 60x60x4mm |
| Automatic rotation speed | revolutions/min | 0,75 to 2,2 r/min |
| Maximum bend angle | degres | 180° |
| Minimum bending radius | 3x the tube diameter | |
| Maximum bending radius | mm | 346 |
| Repeatability of bending | degree | +/- 0,1 degree |
| Reinforcement arm for tubes | mm | diameter greater than 40 mm included |
| BEND lubricant | ml | 8 de 400 ml included |
| Motor power | kW/CV | 4 KW / 5,5 CV. |
| Electric voltage | v / Hz | 230/400V 3 phases 50/60Hz |
| Intensity | A | 16/9 A |
| Machine weight | kg | 900 |
Characteristics :
- Reinforcement tool post support arm for pipes with diameters over 40 mm included.
- 400 ml BEND 8 lubricant included.
- Two bending directions, right or left for easier bending.
- Quick die change over: Maximum 60 seconds.
- 4.0 Technology
- CNC control with 7” touchscreen with more than 20 different languages
- Safety pedal to the right and left.
- Side shelving to store tools.
- All bend dies are made of tempered steel for longer tool life.
- The counter dies are made of bronze alloys to help prevent markings on the outside of the bent profiles.
- Stores up to 10,000 programs.
- Up to 50 different angles on the same piece can be programmed.
- Dimensions can be programmed in inches or millimeters.
- Pivot system with automatic unlocking to help remove material.
- Automatic and programmable spring back correction.
- Automatic unlocking
- Automatic and programmable springback
- Offset head for complex parts.
- Reinforcement tool post support included
- Packaging included
- A lower pallet bench to transport the machine to the worksite or storage.
- The CC90 pipe bender is sent completely assembled.
- 3-layer cardboard box suitable for seafreight.
- Optional: NIMF15 wooden container.
