| Technical specifications | ROMI VTL 500MR / ROMI VTL 500ML | |
| Capacity | ||
| Max. diameter allowed | mm (in) | 740 (29) |
| Max. door opening (load / unload) | mm (in) | 640 (25) (A) |
| Max. turning diameter | mm (in) | 500 (20) |
| Max. turning diameter (recommended) | mm (in) | 390 (15.4) |
| Max. turning height | mm (in) | 620 (24) |
| Max. height allowed | mm (in) | 620 (24) |
| Travel (X axis) | mm (in) | 325 (12.8) |
| Travel (Z axis) | mm (in) | 700 (28) |
| Feeds | ||
| Rapid traverse (Z axis) | m/min (in/min) | 30 (1,181) |
| Rapid traverse (X axis) | m/min (in/min) | 30 (1,181) |
| Headstock | ||
| Spindle | ASA | A2-8” |
| Chuck diameter | mm (in) | 315 or 390 (B) (12.4 or 15.4) |
| Speed ranges | rpm | 2 to 2,500 |
| Speed ranges with ZF reduction gearbox | range I | |
| Speed ranges with ZF reduction gearbox | range II | |
| Max. weight on chuck | kg (lbs) | 590 (1,300) |
| Turret | ||
| Number of tools / stations | un | 12 |
| Tool holder type | BMT 65 | |
| Tool section: square | mm (in) | 25 x 25 (0.98 x 0.98) |
| Tool section bar: diameter | mm (in) | 40 (1.57) |
| Axial driven tool holder | DIN 6499 | ER-32 (Ø 3 – Ø 20 mm) |
| Radial driven tool holder | DIN 6499 | ER-32 (Ø 3 – Ø 20 mm) |
| Speed ranges for driven tool | rpm | 4 to 4,000 |
| Driven tool motor (S2 – 30 min. rating) | hp / kW | 9//7 |
| Power | ||
| Main motor (S2 – 30 min. rating) | hp / kW | 28 / 21 |
| Total installed power | kVA | 30 |
| Dimensions and weight (approx.) (D) | ||
| Floor space required (front x side) | m (in) | 1.7 x 2.3 (67 x 91) |
| Net weight | kg (lbs) | 5,000 (11,000) |
| Max. machine height | m (in) | 3.4 (134) |
| (A) If piece diameter is equal or bigger than maximum door opening it may occur some difficulty for parts load / unload. | ||
| (B) Speed range up to 2,400 rpm for Ø 390 mm (15.4”) chuck. | ||
| (C) Speed range up to 1,500 rpm for Ø 500 mm (20”) chuck | ||
| (D) Without chip conveyor. | ||
