Description
| Technical specifications | ROMI VTL 700R / ROMI VTL 700L | |
| Capacity | ||
| Max. diameter allowed | mm (in) | 750 (30) |
| Max. door opening (load / unload) | mm (in) | 790 (31) |
| Max. turning diameter | mm (in) | 700 (28) |
| Max. turning diameter (recommended) | mm (in) | 470 (18.5) |
| Max. turning height | mm (in) | 627 (25) |
| Max. height allowed | mm (in) | 627 (25) |
| Travel (X axis) | mm (in) | 365 (14.4) |
| Travel (Z axis) | mm (in) | 700 (28) |
| Feeds | ||
| Rapid traverse (Z axis) | m/min (in/min) | 20 (787) |
| Rapid traverse (X axis) | m/min (in/min) | 20 (787) |
| Headstock | ||
| Spindle | ASA | A2-11” |
| Chuck diameter | mm (in) | 390 or 500 (C) (15.4 or 19.7) |
| Speed ranges | rpm | 2 to 2,000 |
| Speed ranges with ZF reduction gearbox | range I | 5 to 500 |
| Speed ranges with ZF reduction gearbox | range II | 2 to 2,000 |
| Max. weight on chuck | kg (lbs) | 1,200 (2,700) |
| Turret | ||
| Number of tools / stations | un | 12 |
| Tool holder type | ROMI | |
| Tool section: square | mm (in) | 32 x 32 (1.26 x 1.26) |
| Tool section bar: diameter | mm (in) | 50 (2.0) |
| Axial driven tool holder | DIN 6499 | |
| Radial driven tool holder | DIN 6499 | |
| Speed ranges for driven tool | rpm | |
| Driven tool motor (S2 – 30 min. rating) | hp / kW | |
| Power | ||
| Main motor (S2 – 30 min. rating) | hp / kW | 46 / 34 |
| Total installed power | kVA | 50 |
| Dimensions and weight (approx.) (D) | ||
| Floor space required (front x side) | m (in) | 2.0 x 2.3 (79 x 91) |
| Net weight | kg (lbs) | 6,000 (13,200) |
| Max. machine height | m (in) | 3.5 (138) |
| (A) If piece diameter is equal or bigger than maximum door opening it may occur some difficulty for parts load / unload. | ||
| (B) Speed range up to 2,400 rpm for Ø 390 mm (15.4”) chuck. | ||
| (C) Speed range up to 1,500 rpm for Ø 500 mm (20”) chuck | ||
| (D) Without chip conveyor. | ||
