Description
| SETTINGS | UNIT | UNIT |
| Shaft diameter | mm | 40 |
| Usable length of the axes | mm | 74 |
| Distance between the centers of the lower axes | mm | 286 |
| Maximum bending capacity on round tubes | inches/mm | 2 and a half inches or 63.5 mm. |
| Engine power | kW/HP | 1.1 KW / 1.5HP. |
| 3-phase electrical voltage | V | 230/400 |
| Roller speed | RPM | 8 |
Features :
- Two-roller drive. The two lower rollers are motorized and grooved for better drive.
- Safe transmission by means of hardened flat gears.
- Hardened and ground steel axles.
- Graduation of the curvature by means of the upper axis, which allows to make bends on tubes and profiles of dimensions of large diameters without deformation.
- Equipped with 9 standard rollers and washers, with which all types of profiles can be made. (Round, square and rectangular tube, solid square, round and rectangular bar, U profile, T profile, angle, flat plate, edge profile,…).
- Millimeter-marked band for bending on the upper axis.
- Two working positions, horizontal and vertical, on the same frame.
- Lateral correction rollers to facilitate bending, making spirals and helical stairs.
- Optional hydraulic kit, easy to assemble, once the machine has been acquired or at the time of purchase (more information in Optional Accessories).
- Lower base suitable for pallet trucks to allow easy transport of the machine to the workplace or storage area.
- The machine is shipped fully assembled.
- Iron pallet and triple-layer cardboard box suitable for sea transport.
- Optional NIMF15 wooden packaging.
