Description
| SETTINGS | UNIT | UNIT |
| Shaft diameter | mm | Lower 65 mm / Upper 80 mm. |
| Usable length of the axes | mm | 130 |
| Roller diameter | mm | 202 |
| Maximum bending capacity on round tube | inches/mm | 4 inches or 101.6 mm. |
| Engine power | kW/HP | 3 KW / 4 HP. |
| Hydraulic motor unit | kW/HP | 0.75 KW / 1 HP. |
| 3-phase voltage | V | 230/400 V |
| Roller speed | RPM | 5 |
Features :
- Three-roller traction. This is an essential requirement for working with smooth-surfaced round tubing to avoid damaging the profile or pipe.
- Safe transmission by means of hardened flat gears.
- Hardened and ground steel axles.
- Improved energy efficiency.
- Electro-hydraulic actuation.
- Graduation of the independent curvature of the lower rollers, which allows bending of much smaller diameters and makes much better use of material than other bending machines.
- The position of the asymmetrical rollers is electronically controlled.
- Viewing the odds.
- Programmable bending limit via potentiometers.
- Control and start-up console for the bending machine included as standard with the machine.
- Equipped with 9 standard rollers and washers, with which all types of profiles can be made. Round, square and rectangular tube, solid square, round and rectangular bar, U profile, T profile, angle, flat plate, edge profile… For round tube or neck, rollers are supplied as an option (See bottom of page, optional accessories).
- Horizontal or vertical working position, without the need for additional special accessories.
- Lateral correction rollers to facilitate bending. Included as standard with the machine.
- Straightening rollers for bending corners. Included as standard with the machine.
- Lower base suitable for pallet trucks to allow easy transport of the machine to the workplace or storage area.
- The machine is shipped fully assembled.
- Iron pallet and triple-layer cardboard box suitable for sea transport.
- Optional NIMF15 wooden packaging.
