Description
| PARAMETERS | UNIT | UNIT |
| Axes diameter | mm | 40 |
| Useful length of axes | mm | 74 |
| Distance between the centers of the lower axes | mm | 230 |
| Maximum bending capacity on round tubes | inches/mm | 2 inches or 50 mm |
| Motor power | kW/CV | 0.75 / 1 |
| Electric voltage | V | 3 phases 230/400 V or 1 phase 230 V |
| Roller speed | RPM | 6 |
Characteristics :
- Two drive rollers. The two lower rollers are motorized and knurled for better grip.
- Secure transmission by using flat hardened pinions.
- Bending regulation by the upper shaft, which allows to curve tube and profile dimensions and profiles of large diameter without deformation.
- We supply the section bending machine MC150B with 9 rollers and standard washers, that can be combined and make all kinds of profiles. (Square pipe, rectangular, square bar, round and rectangular bars, U profile, T profile, angle, flat bar, edged bar …) It is only for special round pipes when we need special rollers.
- Millimeter scale for bending in the upper shaft.
- Two working positions, horizontal and vertical in the same workbench.
- Correction rollers on the sides to control the bending deformation when making spirals and spiral staircases.
- Base cupboard for rollers and accessories.
- Voltage supply: 3 phased 230/400 V or 230 V 1 phased (For other voltages, contact the manufacturer)
- Lower bench palletized to easily transport the machine to the workplace or store it in case of lacking space.
- The machine is shipped fully assembled, you only need to connect it to the power supply.
- Palet made of steel and 3 layer cardboard box suitable for seafreight.
- Optional: Fumigated wooden box NIMF15.
