Description
| Capacity | ||||
| Swing aver Z axis caver | mm(in) | 685 (27) | ||
| Maximum cutting diameter | mm(in) | 530 (21) | ||
| Maximum cutting length | mm(in) | 1,300 (51) | ||
| Travel (X axis) | mm(in) | 280 (11) | ||
| Travel (Z axis) | mm(in) | 1,340 (53) | ||
| Headstock | ||||
| Spindle nose | ASA | A2-8″ | A2-11″ | |
| Spindle thru-hole | mm(in) | 104 (41) | 142 (5.6) | |
| lnner diameter of the spindle bearing (front) | mm(in) | 150 (59) | 200 (79) | |
| Speed range | ||||
| Direct drive
With reduction gearbox (ZF) Feeds |
Range 1 | rpm | 2 to 2,500 | 2 to 2,000 |
| rpm | ||||
| Range Il | rpm | |||
| Rapid traverse (X axis) | m/min (in/min) | 20 (0.79) | ||
| Rapid traverse (Z axis) | m/min (in/min) | 24 (0.94) | ||
| Turret | M type turret | |||
| Number of tools/stations | un | 12 | ||
| Tool holder type | BMT-75 | |||
| Tool section: square | mm(in) | 25 X 25 (1 X 1) | ||
| Tool section: bar | mm(in) | 0 50 (2) | ||
| Axial driven tool holder | OIN 6499 | ER 40 – 0 3 ta 0 26 mm | ||
| Radial driven tool holder | OIN 6499 | ER 40 – 0 3 to 0 26 mm | ||
| Speed range driven tool | rpm | 3 to 3,000 | ||
| Driven tool motor (continuous rating) | hp/kW | 11 /82 | ||
| Tailstock | ||||
| Body travel | mm(in) | 1,143 (45) | ||
| Quill travel | mm(in) | 130 (51) | ||
| Quill diameter | mm(in) | 120(4.7) | ||
| Body positianing | automatic | |||
| Body fixing | hydraulic | |||
| Quill activation | hydraulic | |||
| Quill taper hale | MT | 5 (built-in) | ||
| lnstalled power | ||||
| Main motor AC (S2 – 30 min. rating) | l1p/kW | 45.7 / 33.6 | ||
| Total installed power | kVA | 50 | ||
| Dimension and weight (approx.) (*I | ||||
| Floor space required (front x side) | mm(in) | 6,320 X 2,310 (249 X 91) | ||
| Net weight (approx.) | kg (lbs) | 7,200 (15,900) | ||
(*) Without chip convey
